Automark Strip Tag Embosser ST880E

Automark's ST-880E is best suited for heavy duty strip tag embossing. This machine embosses a tag from continuous strip rolls of aluminum, stainless steel, and cold rolled steel, cutting the tag to length.  A variety of cut-off dies are available - shown below are single hole, double horizontal line and vertical slot.

  • Four types of cut-off dies
    • double line horizontal
    • single line vertical
    • tongue and slot
    • 1/8" round hole (standard die)
  • Standard coil widths 1/2" or 11/16"
  • CRS & aluminum .012 thick
  • Stainless steel .010" thick
  • 40 or 50 Character wheel
  • 40-program memory storage with editing ability.
  • RS-232 Serial Port
  • Automatic sequential numbering
  • Constant or variable data programing








Product Categories:

Barcode label printers and software
 Health Care Downtime Solution
 Niceware/Nicelabel Software

Embossers/Imprinters
 CCS200/300 Low Volume Embosser
 Datacard 150i
 DataCard 275
 DataCard 295
 NewBold 2000 Hospital Imprinter

Metal Plate Embossing & Indenting
 AutoMark Embosser DC-460 Metal Plate
 Automark Heavy duty Embosser DC-890
 Automark Manual Indent HDP-2
 Automark Strip Tag Embosser ST880E
 Automark TMI-2000 Indenting
 CIM ME1000, ME2000 Metal Plate Embosser
 ME2000DM - 2D Barcode Embosser
 Metal Plates and Tags

Home

   |   

About Us

   |   

Services

   |   

Product Lines

   |   

Testimonials

   |   

News

   |   

Contact Us

 © 2014 Davies Enterprises Limited